L2-PDM

On Hand Qty: 429

    210.00 210.00 210.0 USD

    420.00

    This combination does not exist.

    Add to Cart

    Power Distribution Module, 16 ports, 24-48Vin



    This passive backplane module is mounted inside an L2-ENC wall enclosure and accepts up to 16 socket modules in its 16 Sockets(A).  24-48V input power(B) and a communication bus(C) is connected to each Socket to power and control each inserted module.  The Sockets are each connected to an adjoining RJ45 Port(D) where the converted input power is merged with the communication data and accessory 12V power from an L2-APR inserted in the middle of the PDM.  All three signal paths (Power, 12V accessory power, and Data) are sent over Cat5/6 wires from the RJ45 Port to the end devices located around the building. 16 Zone Control Channels(E) create a matrix, allowing any Socket to write or read a control signal. Channels are used to group lights into zones.  The communication bus can extend zones to other panels around a building, and the L2-EGW Ethernet Gateway provides virtually unlimited system size.  Up to 8 PDMs can share channels, or they can be separated, creating up to a 128x128 matrix in a single enclosure.

    INPUT POWER
    Total Power per PDM720W @ 48V supply
    360W @ 24V supply
    180W @ 12V supply
    Power Input Connector2 conductor screw clamp
    Power Input Wire Gauge12-14 AWG (2.0-3.5mm2)
    Power Input Voltage24-48VDC
    Input Voltage Maximum60VDC
    Input Current Maximum15A
    PORTS
    Quantity Ports/Sockets16
    Voltage Maximum65VDC
    Current Maximum1.2A
    Power Maximum60W
    Connector TypeRJ45 (x16)
    Accessory 12V Current Maximum300mA
    Accessory 12V Power Maximum3.6W per port
    Total Accessory 12V Powerup to 15W
    RS485 CONTROL BUS
    Management Speed38,400 bps
    Speed Maximum1 Mbps
    Connector10-pin (top, bottom)
    Port modules per PDMbus128
    CONTROL CHANNELS (Zones)
    Signal Type0-5VDC, PWM
    Channels16
    Channel Expansion Bus Connector34-pin (top, bottom)
    PDMs connectedup to 8 (order ENC-to-ENC cable)
    Sockets per channelup to 128
    PHYSICAL/ENVIRONMENTAL
    Dimensions13.15 x 4.15 x 1.19in (334 x 105 x 30mm)
    Operating Temperature32°F to +122°F (0°C to +50°C)
    Operating Humidity5% to 95% Non-condensing
    RatingDry Rated
    EnvironmentalRoHS
    Safety CertificationsANSI/UL 2108, UL/CSA 60950-1, CAN/CSA C22.2#250.13, CSA C22.2#9.0, CSA C22.2#223, (Certification requires installation in L2-ENC28 enclosure)
    WARRANTY
    Duration10 Years
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products