L2-SVB

L2-SVB drivers are used when the connected devices have their own regulators built in, but are capacitive or inductive loads. This includes most AC/DC screw-in style bulbs.  The L2-SVB sends the same voltage as the PDM supply voltage to the bulbs at the end of the Cat5/6 wires connected to the PDM port.  It does not regulate the voltage except to control it on and off by listening to the zone control channel for the PDM socket it is plugged into.  A replaceable 1.2A fuse protects against over-current or short-circuit conditions.  This module requires an L2-APR.  Its output level is controlled by a Channel Zone Controller like an L2-DM, L2-SW, or L2-CH16.  An indicator LED shows when the L2-SVB is commanded ON. Do not use L2-SVB for wires over 150ft. Check the bulb specifications for dimming capability.  LED strip lights can be powered from the L2-SVB with a slight efficiency impact. Use the L2-SV for strip lights. L2-SVB are ideal for powering sconces and other multi-bulb fixed voltage fixtures.