L2-SV

On Hand Qty: 628

    12.00 12.00 12.0 USD

    24.00

    This combination does not exist.

    Add to Cart

    Switched Voltage Driver, Dimmable, 50W, 24-48V, 1.2A, Low-side Switch



    L2-SV drivers are used when the connected devices have their own regulators built in.  This includes strip LEDs and screw-in or plug-in style bulbs.  The L2-SV sends the same voltage as the PDM supply voltage to the devices at the end of the Cat5/6 wires connected to the PDM port.  It does not regulate the voltage except to control it on and off by listening to the zone control channel for the PDM socket it is plugged into.  A replaceable 1.2A fuse protects against over-current or short-circuit conditions.  This module does not require an L2-APR.  Its output level is controlled by a Channel Zone Controller like an L2-DM, L2-SW, or L2-CH16.  An indicator LED shows when the L2-SV is commanded ON. For large commercial projects, a spread-spectrum slew feature reduces large in-rush currents to protect power supplies.  As a high-speed solid-state switch, the L2-SV can follow the control channel signal to PWM dim the attached strip or bulb, allowing fine control over the dimming smoothly down to 1%.  Check the bulb specifications for dimming capability.  LED strip lights can have uneven intensity end-to-end or have shimmer or flicker due to wire voltage drop or battery charging voltage changes.  LumenCache LED strips have regulators that maintain perfect consistency across the length of the strip and will not shimmer when the PDM is powered by a battery and charger.  L2-SV are ideal for powering sconces and other multi-bulb fixtures.

    POWER
    Power switching60W @ 48VDC PDM Input Voltage
    30W @ 24VDC PDM Input Voltage
    Output currentUp to 1.2A
    Absolute maximum voltage60VDC
    Signal conditioningSpread-spectrum slew
    Channel frequency122-2000Hz
    ZONE CHANNEL INPUT
    Channel frequency122-2000Hz
    Control channel signal typeControlled by 0-5VDC, PWM dimming
    PHYSICAL/ENVIRONMENTAL
    Dimensions1.65 x 0.95x 0.23in (42 x 24 x 6mm)
    Operating temperature=+32°F to +122°F (0°C to +50°C)
    Operating humidity5% to 95% Non-condensing
    EnvironmentalRoHS
    Safety certificationsANSI/UL 2108, UL/CSA 60950-1, CAN/CSA C22.2#250.13, CSA C22.2#9.0, CSA C22.2#223, FCC, CE
    RatingDry Rated
    WARRANTY
    Duration5 Years
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products