On Hand Qty: 0

    96.00 96.00 96.0 USD


    This combination does not exist.

    Add to Cart

    Manual On/Off module, 16 PDM Channels

    The L2-ONF16 controls up to 16 zone channels of lighting from one device.  The zones are controlled via 16 DIP switches to turn ON the channels when the DIP switch is set in the ON position.  When in the OFF position, the L2-ONF16 produces a slight OFF signal to keep driver input signals from floating.  This module fits into the top channel expansion connector and communication bus connector of the L2-PDM.  It requires accessory power from an L2-APR.  16 indicators LEDs show the status of each channel including the dimmed level by intensity.  The channel indication feature makes the L2-ONF16 an excellent commissioning tool.  It can also be used as a low-cost ON command during construction or for zones that must be commanded On full time like USB outlets or locally switched fans and devices.

    Power consumed0.1 W (Requires L2-APR on the same L2-PDM)
    Top connectorMale 34 and 10 pins (Channel and PDMbus)
    Bottom connectorFemale 34 and 10 pins (Channel and PDMbus)
    Channel Outputs1-16 forced On or Off via DIP selectors
    Control channel signal type0-5VDC, PWM Broadcast
    Maximum drivers controlled128
    Dimensions4.3 x 1.48 x 1.2in (110 x 36 x 30mm)
    Operating temperature+32°F to +122°F (0°C to +50°C)
    Operating humidity5% to 95% Non-condensing
    RatingDry Rated
    Safety certificationsFCC, CE
    Duration7 Years
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products