L2-SVB (Box of 24)

On Hand Qty: 0

    768.00 768.00 768.0 USD

    768.00

    This combination does not exist.

    Add to Cart

    Switched Voltage Driver for BULBS, Dimmable, 35W, 24-48V, 1.2A, Low-side Switch



    L2-SVB drivers are used when the connected devices have their own regulators built in, but are capacitive or inductive loads. This includes most AC/DC screw-in style bulbs.  The L2-SVB sends the same voltage as the PDM supply voltage to the bulbs at the end of the Cat5/6 wires connected to the PDM port.  It does not regulate the voltage except to control it on and off by listening to the zone control channel for the PDM socket it is plugged into.  A replaceable 1.2A fuse protects against over-current or short-circuit conditions.  This module requires an L2-APR.  Its output level is controlled by a Channel Zone Controller like an L2-DM, L2-SW, or L2-CH16.  An indicator LED shows when the L2-SVB is commanded ON. Do not use L2-SVB for wires over 150ft. Check the bulb specifications for dimming capability.  LED strip lights can be powered from the L2-SVB with a slight efficiency impact. Use the L2-SV for strip lights. L2-SVB are ideal for powering sconces and other multi-bulb fixed voltage fixtures.

    POWER
    Power switching35W @ 48VDC PDM Input Voltage
    28W @ 24VDC PDM Input Voltage
    Output currentUp to 1.2A
    Absolute maximum voltage60VDC
    Signal conditioningSnubber and flyback diode for inductive loads
    Channel frequency122-500Hz
    ZONE CHANNEL INPUT
    Channel frequency122-500Hz
    Control channel signal typeControlled by 0-5VDC, PWM dimming
    PHYSICAL/ENVIRONMENTAL
    Dimensions1.65 x 0.95x 0.23in (42 x 24 x 6mm)
    Operating temperature=+32°F to +122°F (0°C to +50°C)
    Operating humidity5% to 95% Non-condensing
    EnvironmentalRoHS
    Safety certificationsANSI/UL 2108, UL/CSA 60950-1, CAN/CSA C22.2#250.13, CSA C22.2#9.0, CSA C22.2#223, FCC, CE
    RatingDry Rated
    WARRANTY
    Duration5 Years
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products